Tatazildo Posted February 6, 2017 Share Posted February 6, 2017 Hello, everyone! I'm a proud owner of a SPEC-01 case. I replaced the stock 120mm front fan with 2xCorsair AF140s. I used the same 4x screws that held the 120 in place to install one of the 140s and used the extra 4x that come with case to install the second one. Problem is: how can I install this stock 120 as a top fan? I didn't find any good screws that came with the case or the fans. Plus, it seems that the stock 120 needs a long screw to hold it in place. Thanks in advance. Link to comment Share on other sites More sharing options...
c-attack Posted February 6, 2017 Share Posted February 6, 2017 They are #8 screws. You can get these at most any hardware store for a nominal amount. Take one with you to compare and the length usually is not super important, but make sure it is a #8 machine screw. Link to comment Share on other sites More sharing options...
snapper69 Posted February 7, 2017 Share Posted February 7, 2017 The screw only needs to be long enough to pass through the top of the case and into the fan, about 1cm or so. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.