Jump to content
Corsair Community

Epox 8KDAJ motherboard and VS1GBKIT400C3 ram


Butah P.

Recommended Posts

I recently assembled a machine with a Epox 8KDAJ and VS1GBKIT400C3 (512MBx2) ram. The processor is a Athlon 64 3200+ (512 L2 Cache). When using both sticks, getting blue screens, all siting memory problems. When I removed one stick, no more blue screens, but performance is severly degraded and most things moving very slowly. Any help appreciated.
Link to comment
Share on other sites

  • Corsair Employees
Please test the modules one at a time with http://www.memtest.org to be sure one is not failing. Then if they both pass and as long as your MB maker will support more than one module installed at DDR400 other wise with more than one you may have to run at DDR333. Please install the modules in slots 1-3 or 2-3 and set the Dim Voltage to 2.7 Volts and then test then with http://www.memtest.org
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...