pedal Posted January 12, 2005 Share Posted January 12, 2005 hi, firstofall, my system is a P4 3,0 HT (800Mhz FSB) and a ASUS P4P800 Deluxe. i bought a TwinX 3200XL (2x512mb , CL 2-2-2-5) ram. i installed it on the board with dualchannel (slot1+3) and nothing worked. i installed one 512mb modul and nothing worked. and i installed the other 512mb modul and my system worked very instable. now im looking to find my problem. my bios is 1021beta and with my old ram (2x256mb Samsung/Samsung CL2,5) my system works fine and constant. The settings for the corsair ram was on "auto". plz answer soon =) Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 12, 2005 Corsair Employees Share Posted January 12, 2005 Please load setup defaults with our modules installed and then set the Dim Voltage to 2.85 Volts and disable legacy USB set the timings manually to whats listed. Dim Voltage to 2.85 Volts Resulting Frequency: 166MHz SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 2T SDRAM Active to Precharge Delay (tRAS): 5T Then please test with http://www.memtest.org Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.