Jump to content
Corsair Community

Bad TWINX module


Recommended Posts

Ram Guy,


I recently installed all of my components in to a new enclosure with a new motherboard, upon rebooting just after the welcome to windows screen the unit restarts itself, and continues to repeat this process. Tried Installing to a new harddrive and had a pagefault error in a non page file area. Removed one of the two ram sticks, no change, swaped the sticks and presto no more error. Hooked up the old drives and windows booted ok and has been running ok but only 256 megs doesn't go very far.


Do I have a bad one?


Windows XP Pro

P4 3.0

Abit IC7-G

512 megs XMS3200 (CMX256A-3200LLPT)x2




Link to comment
Share on other sites

  • 2 weeks later...
  • Corsair Employees

Please try and load setup defaults and then set these settings manually.

CPU Freq: 200 MHz

Memory Frequency: 100%/DDR400

Dim Voltage to 2.7 Volts

Resulting Frequency: 200MHz

SDRAM CAS Latency: 2T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 2T

SDRAM Active to Precharge Delay (tRAS): 6T

Then please test the modules one at a time with www.memtest.org!

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...