zollen.kong Posted November 23, 2016 Share Posted November 23, 2016 I am planning to purchase the following gaming PC. Here is my spec: Corsair 250D Mini ITX Case ASUS Z170I Pro Gaming mobo Corsair 100I CPU Cooler The H100I pump requires one 3-pins connector. (x1 - 3pins) Two AF120L fans each requires a 4-pins PWN connector. (x2 - pwm) The 250D front case fan requires one 4-pins PWN connector. (x1 - pwm) I checked the mobo manual. It has only three PWM connectors, but above spec clearly would need four PWM connectors. Am I missing something? Any information would be much appreciated. Thanks. Link to comment Share on other sites More sharing options...
snapper69 Posted November 23, 2016 Share Posted November 23, 2016 The radiator fans should be connected to the pump block, not the motherboard, that way Link can control them. Link to comment Share on other sites More sharing options...
zollen.kong Posted November 23, 2016 Author Share Posted November 23, 2016 The radiator fans should be connected to the pump block, not the motherboard, that way Link can control them. Thanks for the quick reply. Can I replace the radiator fans with Corsair SP120 Quiet Edition? Link to comment Share on other sites More sharing options...
c-attack Posted November 23, 2016 Share Posted November 23, 2016 Thanks for the quick reply. Can I replace the radiator fans with Corsair SP120 Quiet Edition? Yes, but make sure you get the PWM version. There is a physically identical Quiet Edition model with a DC motor and a 3 pin connector that will not work with the pump block. Sometimes websites fail to clearly identify which model they are selling. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.