tjwoosta Posted November 15, 2016 Share Posted November 15, 2016 I noticed recently that my middle mouse button no longer works (I can scroll but not middle click) The first thing I remembered was that when I first got the mouse it had its own separate corsair software just for the mouse where I could assign buttons and such. I looked for the software on the website and discovered that its now supposed to be covered with corsair utility engine, but in utility engine only my keyboard is listed. I searched in windows device manager and it says my mouse is using the standard microsoft mouse software I thought maybe I need to update the firmware or something, but have no idea how to do that without the corsair software.. How do I make this mouse appear in utility engine? Link to comment Share on other sites More sharing options...
terabyte Posted November 15, 2016 Share Posted November 15, 2016 No, if you have the old/legacy M65 (non-RGB) then you still need to use the separate corsair software. The new CUE software does not work with old/legacy devices. Link to comment Share on other sites More sharing options...
tjwoosta Posted November 15, 2016 Author Share Posted November 15, 2016 Ok, so where do I find that software? Link to comment Share on other sites More sharing options...
terabyte Posted November 15, 2016 Share Posted November 15, 2016 http://www.corsair.com/en-us/support/downloads => Select Gaming Mice => from the list download "Vengeance M65 - Software - 1.0.0.11 - 09/19/2013" ;): Link to comment Share on other sites More sharing options...
tjwoosta Posted November 15, 2016 Author Share Posted November 15, 2016 ahh, i see it. Thank you Link to comment Share on other sites More sharing options...
terabyte Posted November 15, 2016 Share Posted November 15, 2016 You're welcome :): Link to comment Share on other sites More sharing options...
Godsinred Posted December 29, 2016 Share Posted December 29, 2016 I have the same mouse and i am running into the same issues. i downloaded the legacy software it says my to plug my mouse in but it is plugged in. i tried restarting and using different ports but it doesn't have any effect. My mouse works but just isn't recognized by the new CUE software or the legacy one. Any advice would greatly be appreciated. Thank you! Link to comment Share on other sites More sharing options...
terabyte Posted December 29, 2016 Share Posted December 29, 2016 As I said above, if you have the legacy non-RGB M65 you need to download the old software. CUE will not recognize it. Link to comment Share on other sites More sharing options...
Toasted Posted December 30, 2016 Share Posted December 30, 2016 Sounds like the mouse not be detected properly. Open Devices and Printers in Control Panel, Does it mention any Corsair M65 mouse? If no, Try the mouse on another computer with the Vengeance software and see if anything changes. Link to comment Share on other sites More sharing options...
Godsinred Posted February 4, 2017 Share Posted February 4, 2017 Thank you both i was able to get it to work! Link to comment Share on other sites More sharing options...
awkomo Posted May 8, 2018 Share Posted May 8, 2018 I too am having the same problem even with the Legacy software. It does not detect the mouse. How did you end up getting it to work? Link to comment Share on other sites More sharing options...
Recommended Posts