Jump to content
Corsair Community

I Never Known


EaglePC

Recommended Posts

OK .I purchase some Cosair Plantium silver heat spreaders3502 V1.1 last year from newegg, I am running 2 sticks these are Cosair 256meg PC3500.ASUS P4P800SE MoBo Dual channel slot 1,3 blue

 

one stick will do 2.5 -4 -4 -8 @200mhz(CL-RCD-RP-RAS)

2 -4 -3 -7@166mhz(CL-RCD-RP-RAS)

 

second stick will do 2.5 -3 -3 -8 @200mhz(CL-RCD-RP-RAS)

2 -3-3 -7@166mhz(CL-RCD-RP-RAS)

 

stick one 3502v1.1

0244436

stick two 3502v1.1

0251055

 

I try everything latest bios change them to slot 2,4 black nothing change ,i would of never known until aida,everest home edition,cpuz told me so ,i run these @ 2-3-3-7 what they were meant to me no problems ,just did I get robbed there not 2-3-37 :eek:

Link to comment
Share on other sites

  • Corsair Employees
All of our modules that end with a C2 designation will have their SPD set JEDEC defined values for the IC we used, and when these modules we manufactured there was no official spec for DDR400 so the official spec for DDR333 was used and why the modules are set that way in the SPD. There is no problem, just you need to set the timings manually.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...