Jump to content
Corsair Community

PSU HX850i with Z10PE D8 WS


cmd7
 Share

Recommended Posts

Hi to all,

Can I ask if the required minimum connections between Corsair HX850i and Asus Z10PE D8 WS are correct? I specify that I do not have more GPU but optionally only one graphics-card. The first weeks also I use only the integrated video card.

 

Thanks

 

psu.jpg

Edited by cmd7
Link to comment
Share on other sites

  • 2 weeks later...

That is 100% correct. You can also attach the 6-pin (bottom right) to any Peripherals & Sata connections when having many PCI slots used. (GPUs, sound cards, etc.)

 

Source: I have that same board.

Also use the Dr. Power switch (next to the power on/reset button on the board bottom mid-left) It will light up the LED's (green or red) to show if the power is OK or not on the parts of the motherboard.

PV

Link to comment
Share on other sites

 Share

×
×
  • Create New...