red-ray Posted October 4, 2016 Share Posted October 4, 2016 DO NOT connect the 5V 4pin LED connector to your Commander mini LED port as those ports runs on 12V. I feel that not being able to connect the HD120 RGB and SP120 RGB Fans to a Commander Mini is rather poor :(: as is them being 3-pin voltage rather than 4-pin PWM :p:. I like the idea of being able to control the colour from a CL Mini/Lighting node and wonder it this is possible. If they are +5 Volt common anode then I suspect that if the anode pin is connected to the +5 of a molex connector and the three control pins to the CL Mini this should work :idea:. Can anyone think of a reason that this could cause issues? (I don't really care about warranty). If this will work then I feel I should be able to get an adapter cable from Corsair :nodding:. Maybe I will have to get one and try... Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.