Jump to content
Corsair Community

Corsair H110i GT Backplate on ASUS ROG Maximus VIII GENE


Recommended Posts

Good Morning!

So I have been trying to get the back plate for the H110i Gt on my ASUS ROG Maximus VIII GENE board, however the Plate seems to be quite a bit too large in that the screw holes are off by quite a bit.


If it happens that I have the wrong cooler for the build I have, that is okay I can get that changed out, however any tips or tricks at this point are welcome.

Unfortunately I did not take any pictures, however.

But once I am home from work I certainly can supply those as needed.

Link to comment
Share on other sites

  • 3 weeks later...
On the backing plate the nuts are mounted in a groove, you just need to slide them into the correct position for your board.


I did not realize this myself until a day or two later. I was going to buy another cooler and started playing with the open box coolers at a Fry's. I found some loose brackets and I realized the one I have might be adjustable. I never realized it. :biggrin:

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...