Jump to content
Corsair Community

Corsair 240 with the new 1080 + CPU cooler?


soulesschild

Recommended Posts

Anyone at Corsair try doing a test/fit build of a Corsair 80i and the new 1080 MSI card with the built in WC in a 240? I was going to try putting both rads in the front but not sure if that'd actually work.

 

Card: https://www.msi.com/Graphics-card/GeForce-GTX-1080-SEA-HAWK.html#hero-overview

Case: http://www.corsair.com/en-us/carbide-series-air-240-arctic-white-high-airflow-micro-atx-and-mini-itx-pc-case

CPU Cooler: http://www.corsair.com/en-us/hydro-series-h80i-v2-high-performance-liquid-cpu-cooler

Link to comment
Share on other sites

  • Corsair Employees

The H80i will most likely not work with this type of setup due to the close proximity of the radiators and extra thickness of the radiator compared to the GTX 1080 graphics card. The link below is a similar setup to what you are attempting. They used H75's so the stagger was exactly the same:

 

http://www.corsair.com/en-us/blog/2014/november/dennis_build_log

Link to comment
Share on other sites

The H80i will most likely not work with this type of setup due to the close proximity of the radiators and extra thickness of the radiator compared to the GTX 1080 graphics card. The link below is a similar setup to what you are attempting. They used H75's so the stagger was exactly the same:

 

http://www.corsair.com/en-us/blog/2014/november/dennis_build_log

 

This was exactly what I was looking for to figure out! Thanks Nick!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...