kris928 Posted January 3, 2005 Share Posted January 3, 2005 Recently my computer has begun to freeze at least once a day. There is no blue screen or error message, however the entire computer stops responding and the lights on my memory stop flashing and only the very top lights stay lit constantly after the freeze. It freezes at any time, often times when the computer is just idle. I have all my memory settings on auto in the bios so I thought I would try setting them manually and see if it helps, however I don't know what to set? Could you please tell me what I need to setup in my asus bios for these memory sticks. Thank you, Kris Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 4, 2005 Corsair Employees Share Posted January 4, 2005 Please install the modules in slots 2-4 and then go to bios setup and load setup defaults and set the Dim Voltage to 2.7 Volts and set the following timings. CAS Latency CL= 3.0 Row Cycle Time tRC Bios Default Row Refresh Cyc Time tRFC Bios Default Ras# to CAS# delay tRCD: 3 Row to Row delay Bios Default Min Ras# Active Time tRAS: 8 Row Precharge Time tRP: 8 Write Recovery Time Bios Default Write to Read delay Bios Default Read to Write Delay Bios Default Refresh Period tREF Bios Default Enable 2T Timing Disabled Then test the system with http://www.memtest.org and make sure it's stable! If you have problems, I would set Enable 2T Timings to AUTO and test it again! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.