Keith Strohm Posted August 4, 2016 Share Posted August 4, 2016 All, I am putting together a new build and despite the fact that I double-checked the H100i V2's compatibility with my Corsair 330R Titanium case, I can't seem to fit the radiator into the top of the case. The rear fan or the cage for optical drives gets in the way. Anyone have success fitting this in to their 330R Titanium case. If I remove the rear fan and install the radiator, will the rear fan fit back on? It looks like it might, but I just want to make sure. If it does, it looks like the tubing will obscure that rear fan. Keith Link to comment Share on other sites More sharing options...
Aldem Posted August 5, 2016 Share Posted August 5, 2016 In my opinion, with the H100i v2 installed, you don't really need the back fan. Link to comment Share on other sites More sharing options...
Keith Strohm Posted August 5, 2016 Author Share Posted August 5, 2016 Yeah, I did remove the fan. It's a tight fit, but doable. I had to turn the cooling tubes a different way to get them out of the space where the rear fan would be. Then I put the rear fan back on just to be on the safe side. There is a little obstruction, but the rear exhaust plus the H100i v2 cooler, and the 140mm front fan and it should be good. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.