Jump to content
Corsair Community

CMD16GX3M4B2800C12 won't post


frannbal

Recommended Posts

Hi everyone,

 

I have a 16gb DDR3 2800mhz kit (4x4gb) CMD16GX3M4B2800C12 of corsair dominator platinum ram, and im unable to post, im not even getting video, the "memok" light turns on and the PC isn't going further in booting process.

 

Mi rig is

 

I3 4160

Asus Gryphon z97

Kingston Fury 2x4gb 1866mhz

AMD HD6670

(Processor and VGA are "temporal")

 

The things i have tried in order are:

 

- Take out the old ram and put a dual channel of dominator in the same place

- Only one dominator memory module in place (tried every module alone)

- Put the dual channel old ram and add a dominator module with them

- Updated bios

- Put the dual channel old ram and add a dominator module with them

- Only one dominator memory module in place

- Put the dual channel old ram, add a dominator module with them and clear CMOS

 

None seems to work, the only "progress" is when i put a dominator module with the dual channel of old memory (3 slots used), the memok light will stay on 1 sec or 2 and then turn off, the PC stays on but no video.

 

Other config than that and the light of memok will stay on and the PC will continuously reboot with no video signal

 

I have tried to use the memok button in every step mentioned, but it doesn't work, the "memok" will start flashing, then flashing a little faster and lastly it reboot, then it come back to the solid memok light state and infinite reboot.

 

I apreciate any help

Thanks

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...