thescam Posted January 3, 2005 Share Posted January 3, 2005 running teh twinx1024-4000PT in a Soyo P4i875P Platinum mobo w/ a P4 3.0Ghz chip. Bus speed is set at 200Mhz, with the DRAM to CPU ratio set at 1.25:1, allowing the RAM to run at 500 mhz while the CPU still runs at 3.0Ghz. Latency set at 3-4-4-8. I get the bios memory beep when I try to boot up... Memory runs great 3200mhz w. no multiplier. Help please! thx in advance... Link to comment Share on other sites More sharing options...
Stormspeed Posted January 3, 2005 Share Posted January 3, 2005 What voltage you running memory? You may have to bump it up. Link to comment Share on other sites More sharing options...
thescam Posted January 4, 2005 Author Share Posted January 4, 2005 set to 1.8v, running at 1.75ish, which is where Corsair tests their memory at while running at 500mhz, 3-4-4-8 Link to comment Share on other sites More sharing options...
thescam Posted January 4, 2005 Author Share Posted January 4, 2005 Will this combo work? In my bios there is an option to run the DDR at a multipled speed of 1.25, allowing the memory to run at 500Mhz while the FSB is still at 200, and the CPU at 3.0 Ram voltage set to 1.8 (1.75 actual) and timing set to 3-4-4-8 (Tested latencys by Corsair) But when I boot up, I get the dreaded memry beep code from Bios. Link to comment Share on other sites More sharing options...
Stormspeed Posted January 4, 2005 Share Posted January 4, 2005 Nope, test voltage is 2.75. You may be looking at CPU voltage. Look at the specs here Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 4, 2005 Corsair Employees Share Posted January 4, 2005 You are welcome to try it, but this MB would not O/C that high when we tested it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.