Cantakerous Posted January 3, 2005 Share Posted January 3, 2005 I have a stick of Corsair CMX 512 3200 LLPT ram that seems to have gone bad. When I boot the computer I get the message: CLI.exe-Application Error The instruction at "0x033c806f" referenced memory at "0x033ef948". The memory Could not be written. My virus scan will no longer load at boot up. I then get messages when I try to close other applications as I am working on the computer. The messages are the same exept for the memory location. It gives different locations that memory could not be written under different programs, but always gives the same location if I use the same application again during a session. I ran Microsofts ram test and found that I received a failed message on Stride 6 with cache on. It expects ffffffff and receives ff7fffff. The program also shows the problem stick to be in bank 3. I then moved the ram sticks from banks 1 and 3 and put them in 2 and 4. I still have the same problem with the second stick of ram Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 3, 2005 Corsair Employees Share Posted January 3, 2005 Can you tell me the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.