Jump to content
Corsair Community

New system OC doing well so far.


Recommended Posts

Hello again,

 

I've finished overclocking my new system and now have settled for 4.5GHz which is rock stable.

 

My settings are as follows:

 

(BIOS Ver 1902)

 

AI Tweaker:

 

AI overclock Tuner = Xmp

BCLK Freq = 100.00

ASUS Multicore Enhancement = Auto

CPU Core Ratio = Sync all Cores

1-Core Ratio = 45

DDR Freq = DDR4-2400 MHz

TPU = Keep Current

 

AI Tweaker/DIGI+ VRM:

 

CPU Load-Line Calibration = Level 6

CPU Power Phase Control = Optimised

 

AI Tweaker:

 

CPU Core/Cache Current Limit Max = 255.50

Min Cache Ratio = 45

Max Cache Ratio = 45

CPU Core/Cache Voltage = Manual Mode

- CPU Core Voltage Override = 1.260

 

All other values are set = Default or Auto

 

Real Temp GT 3.70 used to record temps.

 

Idle temps are 21 - 24

 

 

Full load temps of 68 - 71 while running P95 v28.9 build 2 for over 5 hours using the following to achieve maximum heat production:

 

Set the Min FFT and Max FFT size to 8 and checked Run FFTs in-place. Also set 15 minutes to run each FFT. Ref

 

 

Tested the stability of my overclock by using the following settings which was over 9 hours (while I was at work):

 

Set the Min FFT and Max FFT size to 1344 and checked Run FFTs in-place. Also set 15 minutes to run each FFT. Ref

 

 

I welcome any and all advice you may have in regards to the above and some help in overclocking my RAM.

 

cheers

 

worf105

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...