Jump to content
Corsair Community

Does the LUX/RF need 2 x usb 2.0 or just 1 usb 3.0?


GS1981

Recommended Posts

No, the 2 or 1 port requirement is only for the original K65/K70/K95 RGB which had no pass through and needed 2 cables for power if using USB 2.0.

 

The new LUX series requires 1 cable in any case, you need to plug 1 for the power and the other for the USB pass through. Plugging in only the one for the power will leave the pass through disabled.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...