xeneizes Posted January 1, 2005 Share Posted January 1, 2005 hi guys, i have an 512 XMS PRO CL2 module installed on my rig, currently it is configured CAS >2.5 RAS to CAS >3 RAS PRECHARGE > 3 cycle time (TRAS) >11 if i change the cas to 2, my pc wont boot and i have to reset bios. The voltage is at 2.7, could i increase it and see if i can boot? what CAS latency your recommend for me? SPECS NF7-S v2.0 AXP mobile 2500 at 2.4 ghz (215*11.5 at 1.65v) 512 xms pro CL2 antec true power 430 thanks for your time, Link to comment Share on other sites More sharing options...
Wired Posted January 1, 2005 Share Posted January 1, 2005 That stick is rated @ cas 2.5 for amd systems, so it's fine. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.