Jump to content
Corsair Community

H80i v2 - Fan Control with LINK have no effect


Belearas

Recommended Posts

Hi!

 

I have installed an H80i v2 and connecting the USB cable to the motherboard. I have made some Profiles - i will get a cool system with MAX rpm.

 

All work finde, the profiles works, the RPM of the fan goes to 100%. I restart the PC and now, the fan want´s to start, i can hear it to 100% but is goes back to 600-900 rpm..

 

I choose at the fan "max" - it goes to 1300 - and than again back.

 

What the hell? The Cooler is on my GTX-1080 and its not funny when i see that the card has 60° because the fans are chilling around about 600rpm....

 

at the first start of link, it works and the fans are going to 2500rpm and cooled the card to 30°...

 

I had reinstalled it, no it have also again 2640rpm and cooling the GPU greatly. When i restart the pc. Doesnt have an effect again, i heard the cooler on the reebot works at 100%, if windows startet it turn back to 800rpm and i CANT switch again with LINK software to 100%, had no effect. wth..

Link to comment
Share on other sites

Yes in Bios is all fan control disabled.

 

I will post specs later in profile. Still on road.

 

Gehäuse: PHANTOM black ENTHUSIAST FULL TOWER

Setup: Intel Core i7 3960X @4.5GHz

Corsair H80i Wasserkühlung

Zotac GeForce GTX-1080 founders edition!

Seasonic SS-1200XP3 Netzteil

Asus RAMPAGE IV BLACK EDITION MB

Corsair Vengeance 16GB DDR3

DDR3 extreme Corsair Lüfter

1x Samsung EVO 850 250GB

3x Seagate SSHD 2TB

Corsair K70 MX-Cherry Red

Steelseries WoW Gaming Maus

Soundkarte Dolby Digital live creative sound blaster z

 

 

NVIDIA 3D VISION PAKET

Monitor: ACER GD245HQ 120HZ 24"

 

Any idea why after reboot doesnt work?? It drives me crazy..

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...