Jump to content
Corsair Community

[Build Log] Project Nighthawk

Recommended Posts

Project Nighthawk




Motherboard: EVGA Z170 Classified | CPU: Intel Skylake i7 6700k, 4.6GHz | Memory: Corsair Dominator Platinum, 16GB, 3000MHz

GPU: EVGA GTX 980 Ti SC+ AXC 2.0+, w/OC | PSU: EVGA SuperNOVA 850 G2 | SSD: Samsung 840 Pro, 256 GB | SSD: Samsung 850 Pro, 512 GB, (x2) | Case: Corsair Obsidian 750D


Planned Watercooling Hardware:


CPU Block: EK-Supremecy Evo, Nickel/Acetal

GPU Block: EK-FC GTX980Ti Waterblock w/black backplate, Nickel/Acetal

Radiator: Alphacool NexXxos XT45, 360 and 280 variants

Pump: Alphacool VPP655 Single Edition (x2)

Pump Top: EK-XRES 100 Revo D5 Pump Top (x2)

Reservoir: Reservoir: EK-XRES X3 w/Multitop, 250mm (x2)

Tubing: 1/2" OD Copper Pipe

Fitting: Primochill RevolverSX 1/2" Rigid Compression, matte black

Fitting: Bitspower Stop Fittings, matte black

Valve: Bitspower Dual Rotary Mini Valve, matte black (x2)

Fans: Corsair SP 120 QE. Corsair AF 140 QE, NF-A14 FLX (x2)

Case Lighting: NZXT Hue+

Fan Controller: NZXT Grid+ V2

Link to comment
Share on other sites

Hey everyone,


I thought I'd share a little bit of a work log over here on the Corsair forums since the entirety of my system is built upon a modified 750D case. You can find a more thorough work log over at theEVGA forums, but I will be making updates here as well.

Link to comment
Share on other sites

  • 2 weeks later...

Hey all,


I haven't had much time, nor the computer, to provide timely updates but here are the most recent pictures that I can share. Feel free to ask any questions, and I'll do my best to respond in a timely matter.







Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...