rick7653 Posted December 31, 2004 Share Posted December 31, 2004 I have an asus p4p800se with 4 256 meg sticks of twin-x (corsair ram). They are all supposed to be the same according to the numbers on the spreaders and the package it came in but when I ran aida it says 2 of them are PC3200 and two are pc3200c2. I have the 3200's in one channel and the 3200c2 in the other (4 slots). Question is this: Since I am using spd it seems that the two different timings would conflict so I think I should run manual instead of spd. the 3200 is rated 3 3 3 8 and the 3200c2 is rated 2.5 3 3 8 I believe so What settings should I try for, and please don't just say 3338 or something like that. I need the specific settings for the bios below. Thanks in advance. This is my first post to this forum so please no flaming. :eek: CAS RAS Ras/CAS Precharge delay Burst length Dram idle timer dram refresh mode I have tried all the forums except this one and you get 100 different answers. Please somebody help me unload my brain!!!!!! It's burningggggggg..... Link to comment Share on other sites More sharing options...
CandyKid Posted December 31, 2004 Share Posted December 31, 2004 Welcome to the forums, rick7653! How about... 3338? *cough* Just kidding. Please list the full model names of your memory, including revision numbers. On your modules themselves, on the little sticker, it will say something like: TwinX1024-3200C2 XMS3202v2.1 125151B Or something like it, please list that for both TwinX sets (each pair will say the same thing on both modules). However, you could try: CAS: 2.5T RAS to CAS Delay: 3 Row Precharge (tRP): 3 Cycle Time (tRAS): 7 DDR Voltage: 2.8v Command Rate: 1T Burst Length: Auto is fine. Refresh: AUTO Idle: AUTO PLUR CK Link to comment Share on other sites More sharing options...
rick7653 Posted December 31, 2004 Author Share Posted December 31, 2004 Welcome to the forums, rick7653! How about... 3338? *cough* Just kidding. Please list the full model names of your memory, including revision numbers. On your modules themselves, on the little sticker, it will say something like: TwinX1024-3200C2 XMS3202v2.1 125151B Or something like it, please list that for both TwinX sets (each pair will say the same thing on both modules). However, you could try: CAS: 2.5T RAS to CAS Delay: 3 Row Precharge (tRP): 3 Cycle Time (tRAS): 7 DDR Voltage: 2.8v Command Rate: 1T Burst Length: Auto is fine. Refresh: AUTO Idle: AUTO Seem stable so far. Thanks for the numbers. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.