Jump to content
Corsair Community

Help H100i Y connector problem


david jai

Recommended Posts

Hi, my second time building a computer, first with this cpu cooling product, i have a AsRock Xtreme 4 motherboard and using a NZXT 530 Phantom case, i can't seem to plug that Y connector from the top to anything. Can someone help please, i know we can take that part of to make it 4pin, but i can't seem to find any place to plug those 2 plugs into. Thanks in advance
Link to comment
Share on other sites

The Y-connector is for the radiator fans, which will be powered from the pump block. The tiny end fits into the side of the pump. Make sure you put it on before mounting the block. It can be a real nuisance to insert once it's on. There are some sneaky plastic end caps that need to be removed before you can plug the fans in. They are to prevent damage to the pins during shipping. If this is the issue, don't feel bad. You are not the first person do stumble on this. However, we already gave away the prize for the 1,000,000th victim a few months back, so there is no additional consolation.
Link to comment
Share on other sites

If the prior H100i...

http://www.guru3d.com/index.php?ct=articles&action=file&id=1344

 

 

If the current H100i V2 or GTX, it comes out of the right side of the block.

http://www.guru3d.com/index.php?ct=articles&action=file&id=15496&admin=0a8fcaad6b03da6a6895d1ada2e171002a287bc1

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...