rund1me Posted December 30, 2004 Share Posted December 30, 2004 After i got my new "CMX512-3200c2 -> XMS3202v4.1" i added it in the second memory bank, then i started and "Windows\System32\Config\System" blablabla -> and other errors with BIOS or NortonGoback occured so i decided to put my new Memory out of the system. My OLd Memory is : "CMX512-3200cx2 -> XMS3202v4.1" and My Motherboard is-> MSI KT4U -> till today i thought that this will be no problem caus KT400 dont support dual channel ... so teach me something else or whats the problem... PLEASE HELP!!! SiSoftware Sandra(without new Memory) says: ---------------------------------- Mainboard Manufacturer : MSI MP Support : 1 CPU(s) MPS Version : 1.40 Model : MS-6590 Version : 1.0 --- Memory Controller Error Detection Method : ECC Error Correction Capability : 1-bit Supported/Current Memory Interleave : 1-way / 1-way Number of Memory Slots : 3 Maximum Installable Memory : 3072MB Maximum Module Size : 1024MB Supported STD/FPM/(B)EDO Speeds : 70ns, 60ns Supported Memory Types : STD, FPM, EDO, Parity, ECC, SIMM Supported Memory Voltages : +3.3V --- Physical/BIOS Memory Banks DIMM1 (RASL-1 RASL-0) : 512MB DIMM SDRAM double-bank DIMM2 : Empty DIMM3 : Empty --- Chipset 1 Model : VIA Technologies Inc VT8377 Apollo KT400/A/600 CPU to PCI Bridge Bus(es) : ISA AGP PCI IMB USB FireWire/1394 i2c/SMBus Front Side Bus Speed : 2x 133MHz (266MHz data rate) Maximum FSB Speed / Max Memory Speed : 2x 166MHz / 2x 200MHz Width : 64-bit IO Queue Depth : 4 request(s) --- Logical/Chipset 1 Memory Banks Bank 0 : 256MB DDR-SDRAM 2.0-3-2-6CL 1CMD Bank 1 : 256MB DDR-SDRAM 2.0-3-2-6CL 1CMD Bank Interleave : 2-way Speed : 2x 199MHz (398MHz data rate) Multiplier : 3/2x Width : 64-bit Power Save Mode : No Fixed Hole Present : No --- Memory Module(s) Memory Module 1 : Corsair CMX512-3200C2 512MB 16x(32Mx8) DDR-SDRAM PC2700U-233-700 (CL2.5 up to 167MHz) (CL2 up to 167MHz) --------------------------------- I Have no time to **** around with memory problems. cause my Animations are waiting ! THX for support !! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 30, 2004 Corsair Employees Share Posted December 30, 2004 According to this you have 2 256 Meg modules, are you trying to add another 512 Meg module? And if so what are you setting the memory frequency and timing too? In addition, you say you have CMX512-3200C2 the settings for this module and this platform should be Cass 2.5-3-3-6 at DDR333 with one module and if you install more than one you may need to run the memory at PC-2100, sorry but that is a chipset limitation. Link to comment Share on other sites More sharing options...
Wired Posted January 1, 2005 Share Posted January 1, 2005 RG, he only has one 512 MB stick in there ATM, that output stuff is reading 2 banks for the one stick. Had to do a double take myself. rund1me, What CPU do you have? Also, dual channel is a property of the memory controller in your chipset, not the memory. It's compatible. Link to comment Share on other sites More sharing options...
rund1me Posted January 9, 2005 Author Share Posted January 9, 2005 no its just one memory module what with kt400 just one memory module runs 400mhz and if i put in both just 26 ?? whats that 333mhz ?! IT JUST SUCK !!! Link to comment Share on other sites More sharing options...
Wired Posted January 10, 2005 Share Posted January 10, 2005 I have absolutely no idea what you just said man. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.