Zdatel Posted December 30, 2004 Share Posted December 30, 2004 Hi, I belive i have a bad stick of 3200LL twinx. When i run memtest it comes up with a bunch of errors on all passes. Was wondering what i need to do to RMA the stick or the whole pair. System specs are p4 2.8 abit is7-g motherboard 450w antec power supply and run all at default specs. Please let me know what i need to do. Thanks Link to comment Share on other sites More sharing options...
Zdatel Posted December 30, 2004 Author Share Posted December 30, 2004 Forgot to say that the system has been up and running for about a year and never had any errors tho i may have just not noticed them. Also i am using http://www.memtest.org or whatnot its the one you seem to recomend. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 30, 2004 Corsair Employees Share Posted December 30, 2004 I would try and set the Dim Voltage to 2.7 Volts and then test the modules one at a time with http://www.memtest.org and you should not have any of the performance options set in your bios. So just go to bios and load setup defaults and then set the Dim Voltage and test the modules one up. If you do indeed fine one is failing and if you have more than one I would suggest you RMA both of them so the new modules match! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.