Sepps Posted December 30, 2004 Share Posted December 30, 2004 I got a pair of XMS3200 dual channel. I get frequent lockups in games and other programs. If I take out one of the memory modules it works fine. If I put it back in it locks up. If I take the other module out, it locks up. So i believe that I have one stick that is bad. I have tried all the slots on my motherboard and still has the same problem. I have an ASUS P4C800-E Deluxe with the newest BIOS, version 1019 and bios settings at defualt. Help would be apprechiated. Thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 30, 2004 Corsair Employees Share Posted December 30, 2004 Can you tell me the exact module part# and the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
Sepps Posted December 30, 2004 Author Share Posted December 30, 2004 Part number XMS3208v1.1 on a Pentium 4 3.2ghz 800FSB. All bios settings are default, anything specificly you want me to look at? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 30, 2004 Corsair Employees Share Posted December 30, 2004 The part# should be like this: CMX512-3200C2 XMS3202 Rev 1.1 0404098 Link to comment Share on other sites More sharing options...
Sepps Posted December 30, 2004 Author Share Posted December 30, 2004 CMX512-3200XLPT XMS3208v1.1 0435062-4 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 30, 2004 Corsair Employees Share Posted December 30, 2004 Please try and set your Dim Voltage to 2.75 Volts and then test the modules one at a time with http://www.memtest.org with Legacy USB disabled. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.