Jump to content
Corsair Community

Project "CORSAIR 760T Black & White"


Recommended Posts

http://i63.tinypic.com/2dgpclj.jpg

 

Hi everyone and welcome to my new project. :biggrin:

After the last experience on a Desk ( Dragon Desk), I decided to modding a case, this time ... especially a Corsair Graphite 760T V2 - black / white

 

A short complete description of the entire project and job accounting.

Ago if you wish, you can also follow me on my Facebook page:

https://www.facebook.com/GasMod-267934856887732/

 

 

http://i65.tinypic.com/2zgas0k.jpg

 

 

Motherboard: UNDECIDED

CPU: Intel i7 6700K

Memory: Corsair Platinium DDR4 3000 32Gb

GPU: Asus Strix GTX 970

PSU: Corsair HX 850i

SSD: 2 Corsair Neutron Series XT 480GB

 

 

http://i67.tinypic.com/r8cqdi.jpg

 

 

CPU Block: Phobya CPU-Cooler UC-2 LT - Silver Nickel Plexi Edition

GPU Blocks: Bitspower VG-NGTX970ADIIS Acrylic Top With Stainless Panel (Clear)

Radiators: NexXxoS UT60 Full Copper 360mm

Pump: Alphacool VPP655 - single edition

Reservoir: Alphacool Eisbecher D5 250mm Plexi

Tube Fittings: Alphacool

Coolant: Phobya ZuperZero Clear

 

 

http://i66.tinypic.com/fara5c.jpg

 

 

Case: Corsair Graphite 760T V2 - black/white

Fans: Corsair Air Series SP120 High Performance Edition 120mm

Cables: Corsair sleeved DC Cable Kit, WHITE

Keyboard: Corsair Strafe RGB MX Silent

Mouse: Corsair Gaming Sabre RGB

Lighting: Phobya LED-Flexlight HighDensity 60cm white (72x SMD LED´s)

 

 

http://i67.tinypic.com/110j7mh.jpg

Link to comment
Share on other sites

Here we are guys, it's time to start editing some part of the Corsair 760T.

So hand Dremel, and flexible. :D:

 

I start to remove the front part of the dvd. Unfortunately goes brutally cut, because it is not fixed by simple rivets, but it's all a folded block.

 

http://i65.tinypic.com/vsetmq.jpg

 

http://i65.tinypic.com/2dqtweb.jpg

 

http://i63.tinypic.com/1zpo51y.jpg

 

http://i66.tinypic.com/2usyixy.jpg

Link to comment
Share on other sites

Now is the best part of the cuts, after careful measurement..... :D:

 

I also have to eliminate this part, as the VGA will be placed vertically. :naughty::naughty:

 

http://i63.tinypic.com/291hxg0.jpg

 

http://i67.tinypic.com/309oo6f.jpg

 

http://i66.tinypic.com/35lz0h3.jpg

 

http://i63.tinypic.com/2u7rosk.jpg

Link to comment
Share on other sites

Corsair Material

 

http://i67.tinypic.com/11rg0gp.jpg

 

http://i63.tinypic.com/149tn2u.jpg

 

http://i63.tinypic.com/24g6g3l.jpg

 

http://i63.tinypic.com/2repezp.jpg

 

http://i68.tinypic.com/301daw5.jpg

 

http://i68.tinypic.com/50rxv7.jpg

 

http://i63.tinypic.com/2h367wz.jpg

 

 

Aquatuning Material

 

 

http://i63.tinypic.com/zuh35x.jpg

 

http://i64.tinypic.com/2vbmyqw.jpg

 

http://i65.tinypic.com/2zylnac.jpg

 

http://i68.tinypic.com/23jptnb.jpg

 

http://i66.tinypic.com/aorj1v.jpg

 

http://i65.tinypic.com/vwzd09.jpg

 

http://i65.tinypic.com/1zq32wk.jpg

 

http://i64.tinypic.com/2nkm651.jpg

Link to comment
Share on other sites

Hi guys, I continue staring and realizing the support to fix the VGA vertical .....

 

Recovering the "support" of the vga from an old case, and working with an aluminum plate, to fix everything. :D: :D:

 

http://i67.tinypic.com/10yga6f.jpg

 

http://i65.tinypic.com/smtwqp.jpg

 

http://i66.tinypic.com/fz3vcj.jpg

 

And fixed all the time with the aluminum rivets. :D:

 

http://i68.tinypic.com/154caqp.jpg

 

http://i65.tinypic.com/29kqrlw.jpg

Link to comment
Share on other sites

Continue, with realize with an aluminum bar, the internal level to securing homes with more and aluminum rivets, and some small allen. :D:

 

http://i66.tinypic.com/r0rw2t.jpg

 

http://i65.tinypic.com/fato2x.jpg

 

http://i66.tinypic.com/nowy1c.jpg

 

http://i65.tinypic.com/2cnxbsy.jpg

 

http://i63.tinypic.com/11wbx1s.jpg

 

http://i64.tinypic.com/b6699c.jpg

 

 

............... :D:

Link to comment
Share on other sites

This afternoon I began to fix the front aluminum bar, putting it level with the rest of the case. :D:

 

http://i67.tinypic.com/2j5nngy.jpg

 

In the lower part will then fissta an aluminum plate, laser cut. :dremel:

 

http://i67.tinypic.com/4h2wxe.jpg

 

http://i68.tinypic.com/2d0x9va.jpg

 

 

.................. :D:

Link to comment
Share on other sites

Hi .... :D:

Today I decided to enter the inside of the radiator, this grid to fix the slats of rad.

You will need some cut, since it is the largest of the radiator.

Some cut with flexible and will be perfect....:laughing::laughing:

 

http://i63.tinypic.com/qravxs.jpg

 

http://i66.tinypic.com/w71kkp.jpg

 

http://i65.tinypic.com/214a03t.jpg

 

http://i66.tinypic.com/qn319x.jpg

 

............. :p:

Link to comment
Share on other sites

It 's time to discard the plexyglass..... The plate is white, but slightly transparent.

 

http://i65.tinypic.com/219b2uq.jpg

 

Now the realization of the depth of the radiator box.

 

http://i67.tinypic.com/105sit5.jpg

 

http://i64.tinypic.com/20p2a6b.jpg

 

Finally try the shelf ....

 

http://i67.tinypic.com/mw64qp.jpg

 

http://i64.tinypic.com/2uorozo.jpg

Link to comment
Share on other sites

  • 3 weeks later...

Hi boys .... :D:

Because I have to wait until I arrive the mobo, Today I began to fix the pump and tank on plexy.

I also decided to put the fans inside the Corsair. ;):

 

I have also connected the radiator using his elbows to 90° of Alphacool, and pierced the Plexiglas to accommodate the bulkhead. ::D:

 

http://i66.tinypic.com/68fqmt.jpg

 

http://i64.tinypic.com/986a1c.jpg

 

http://i67.tinypic.com/fom4hf.jpg

 

http://i68.tinypic.com/oivsxf.jpg

 

http://i65.tinypic.com/2zf8uir.jpg

 

 

................ :laughing: :laughing: :laughing:

Link to comment
Share on other sites

  • 2 weeks later...

Hi guys. :D:

Meanwhile I had to wait until I arrived a bit of material to continue ......

 

A few photos of the new WB.

 

http://i65.tinypic.com/2eaqjo5.jpg

 

http://i63.tinypic.com/2u8yrnt.jpg

 

Who immediately mounted on Asus 970 Strix, to have the footprint measures in case. :D:

 

http://i68.tinypic.com/egcyed.jpg

 

http://i66.tinypic.com/25fuh6e.jpg

 

Also during this period I also got the processor that will be used in mod. :D:

 

http://i68.tinypic.com/9zlopc.jpg

 

http://i63.tinypic.com/nl4lkn.jpg

 

 

Now I must wait until I arrive the motherboard..... ;):

Link to comment
Share on other sites

Hi boys :D:

 

Today I started working the front of the Plexiglas, from 5mm.

And after the necessary measurements, I can start.

 

http://i67.tinypic.com/dczy3q.jpg

 

http://i66.tinypic.com/neyuet.jpg

 

And I start with the cuts. :laughing: :laughing: :laughing: :laughing:

 

http://i64.tinypic.com/fefnyh.jpg

 

http://i67.tinypic.com/33omt5t.jpg

 

http://i63.tinypic.com/2sbo6qg.jpg

 

And finally here is how: :biggrin:

 

http://i63.tinypic.com/334t8x3.jpg

 

............... :D: :D:

Link to comment
Share on other sites

  • 2 weeks later...

Hi boys ... :D: :D:

 

And finally, after a thousand problems with shipping, and the first motherboard stolen a customs, then finally it came:: :cool: :cool:

Some pictures, and ready to mount processor - ram - wb.

 

http://i66.tinypic.com/29xc4g4.jpg

 

http://i64.tinypic.com/aviu5i.jpg

 

http://i65.tinypic.com/246nlf7.jpg

 

http://i66.tinypic.com/wmj7gl.jpg

 

 

................ :D: :D:

Link to comment
Share on other sites

And finally we begin to mount HW. :D: :D: :D: :D: :D:

 

http://i65.tinypic.com/29dfuja.jpg

 

http://i64.tinypic.com/o6kync.jpg

 

http://i64.tinypic.com/3461h7m.jpg

 

http://i64.tinypic.com/14xji44.jpg

 

http://i67.tinypic.com/b7jeyu.jpg

 

http://i65.tinypic.com/qx2rnc.jpg

Link to comment
Share on other sites

Mod completed. :D: :D:

 

I have done everything possible to complete the hack, but unfortunately I have a problem with Motherboard. :mad:

After the holidays I'll make a RMA to Asus, because the Rams slot ( A1- A2 )do not work

 

The pc part, and works well, only with 2 ram inserted into slots ( B1 - B2 ).

The liquid cooling system is working perfectly. :D:

 

and now being in summer the asus support does not respond and just reopen contact them , to have a new functioning motherboard .

 

Here the final photos of the mod .

 

http://i68.tinypic.com/2ug14ep.jpg

 

http://i66.tinypic.com/wtatuf.jpg

 

http://i64.tinypic.com/23kp4pt.jpg

 

http://i67.tinypic.com/15rdpuu.jpg

 

http://i63.tinypic.com/293u1dx.jpg

 

http://i67.tinypic.com/15wzzg3.jpg

 

http://i68.tinypic.com/xljgc0.jpg

 

http://i65.tinypic.com/11bk7eo.jpg

 

A special thanks goes to Corsair Aquatuning, and Pc -cooling, for their help in the realization of the mod, with their materials. :D: :D: :D:

Link to comment
Share on other sites

  • 4 weeks later...

Nice mod! I would like to see an aquaero instead of the Rheobus.

 

How is the GPU connected to the motherboard? (on this picture it looks like its unconnected)

 

I don't get how your water circuit works. Why are there three ports at the flow meter? :confused:

Edited by brainless
Link to comment
Share on other sites

We're finally back. :D:

 

Replaced the faulty motherboard ( asus ) with a Asrock Z170 Estreme4, and everything works perfectly. :[pouts: :[pouts:

 

There I post pictures this time final. :D:

 

http://i64.tinypic.com/2gv2c05.jpg

 

http://i65.tinypic.com/35iybzq.jpg

 

http://i66.tinypic.com/2unvm90.jpg

 

http://i67.tinypic.com/20tktpi.jpg

 

http://i67.tinypic.com/14bt7bl.jpg

 

http://i65.tinypic.com/25p22l2.jpg

 

http://i66.tinypic.com/2d94o6u.jpg

 

In a few days I will insert on YouTube, my video of the Mod. :laughing: :laughing:

Link to comment
Share on other sites

http://i63.tinypic.com/2dgpclj.jpg

 

Hi everyone and welcome to my new project. :biggrin:

After the last experience on a Desk ( Dragon Desk), I decided to modding a case, this time ... especially a Corsair Graphite 760T V2 - black / white

 

A short complete description of the entire project and job accounting.

Ago if you wish, you can also follow me on my Facebook page:

https://www.facebook.com/GasMod-267934856887732/

 

 

http://i65.tinypic.com/2zgas0k.jpg

 

 

Motherboard: UNDECIDED

CPU: Intel i7 6700K

Memory: Corsair Platinium DDR4 3000 32Gb

GPU: Asus Strix GTX 970

PSU: Corsair HX 850i

SSD: 2 Corsair Neutron Series XT 480GB

 

 

http://i67.tinypic.com/r8cqdi.jpg

 

 

CPU Block: Phobya CPU-Cooler UC-2 LT - Silver Nickel Plexi Edition

GPU Blocks: Bitspower VG-NGTX970ADIIS Acrylic Top With Stainless Panel (Clear)

Radiators: NexXxoS UT60 Full Copper 360mm

Pump: Alphacool VPP655 - single edition

Reservoir: Alphacool Eisbecher D5 250mm Plexi

Tube Fittings: Alphacool

Coolant: Phobya ZuperZero Clear

 

 

http://i66.tinypic.com/fara5c.jpg

 

 

Case: Corsair Graphite 760T V2 - black/white

Fans: Corsair Air Series SP120 High Performance Edition 120mm

Cables: Corsair sleeved DC Cable Kit, WHITE

Keyboard: Corsair Strafe RGB MX Silent

Mouse: Corsair Gaming Sabre RGB

Lighting: Phobya LED-Flexlight HighDensity 60cm white (72x SMD LED´s)

 

 

http://i67.tinypic.com/110j7mh.jpg

 

-----------

 

[ame=

]
[/ame]
Link to comment
Share on other sites

  • 3 weeks later...
  • 4 weeks later...

How is the GPU connected to the motherboard?

I don't get how your water circuit works. Why are there three ports at the flow meter? :confused:

I'd like to know as well!

 

Here I am young, and sorry for the delay.

The GPU, and connected with this:

Li-Heat PCI-E Gen 3.0 Ribbon flexible Riser Cable - Black

We are not seen, because it remains in the rear.

https://www.highflow.nl/hardware/videokaarten/li-heat-pci-e-gen-3.0-ribbon-flexible-riser-cable-black.html

 

The part below the flow meter, It is simply a drain. :D:

https://s15.postimg.org/hyfosqebv/IMG_20161017_185220.jpg

Link to comment
Share on other sites

 Share

×
×
  • Create New...