Tobias Posted December 28, 2004 Share Posted December 28, 2004 Hello, I think I have a faulty stick of ram. Programs are crashing randomly after several minutes of use. So, I´ve tested the memory with "memtest86", the "Block Move"-test show over 40 errors. Any help would be appreciated! Thanks Link to comment Share on other sites More sharing options...
Jabberwok Posted December 28, 2004 Share Posted December 28, 2004 Tobias my friend, before anything else, you'll have to tell us what kind of beast were going up against : CPU, mainboard, PSU, vid card, the works... Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 28, 2004 Corsair Employees Share Posted December 28, 2004 Yes, and please tell us the bios settings you had set for both CPU and memory! Link to comment Share on other sites More sharing options...
Tobias Posted December 28, 2004 Author Share Posted December 28, 2004 Ok, here we go: AMD Athlon XP 2800+ (T-Bred) 512 MB XMS 2700 C2 ATI Radeon 9700 Pro 128MB Leadtek K7nCR18D PRO Bios Settings: FSB Frequency : 166MHz Memory Timings : by SPD CAS : 2.0 RP : 3 RCD : 3 RAS : 7 CPU Vcore Setting : Default CPU Vcore Current : 1.63V AGP Slot Vddq Settings : Default AGP Slot Vddq : 1.47V Thank a lot! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 29, 2004 Corsair Employees Share Posted December 29, 2004 Please try and set the Dim Voltage to 2.7 Volts and if you have 2 modules please set the timings manually to Cass 2.5-3-3-7 and then test them again with http://www.memtest.org. if you still get errors then let's get them or it replaced. Please send us a email with a copy of the form or all of your info name address and phone# and the Module part# and copy the link to this post and email it to Warranty@corsairmemory.com. Or you can also use the On Line RMA Request Form as well. If after 1 day or 24 hours excluding weekends you do not get the rma please email the same to rma@corsairmemory.com and we will help to resolve it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.