Jump to content
Corsair Community

A7nx8 & Xms Pc3200


Jackg

Recommended Posts

Ok so here is the system info: Asus A78NX Deluxe v1.004 AMD Athlon XP 2600 Corsair XMS 3200 256DDR (two) Asus V9280 128mb Western Digital Caviar 80GB SE LiteOn 48x CD-RW Microsoft Optical Mouse Generic Keyboard TTGI 420w power supply Microsoft Windows 2000 Pro spk 4 What would be the proper Memory setting in the BIOS. I want to get the most out of it without overclocking or losing stability. -Thanks
Link to comment
Share on other sites

  • Corsair Employees
Please try: CPU Freq: 166Mhz Memory Freq: 100% Resulting Frequency: 166MHz SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 2T SDRAM Row Precharge (tRP): 2T SDRAM Active to Precharge Delay (tRAS): 5T Also I would set the Dim or DDR Voltage to 2.7 Volts Ram Guy
Link to comment
Share on other sites

  • 3 weeks later...
Ram Guy, The memory came back from RMA and I installed them in slot 1 & 3 (dual channel) with your recommended BIOS settings. I have had 3 blue screen dumps since and never had that problem previously. I am going to run Memtest86. How many errors would be considered a problem and how long should I run the test? -thanks
Link to comment
Share on other sites

  • Corsair Employees
I would try the latest bios if you have not done so. And I would let it run over night with [url]www.memtest86.com[/url] to stress the system and modules. There should be No errors. Also you might try loading setup defaults and then set the timings that I gave you so there is no bios issues. Ram Guy
Link to comment
Share on other sites

  • Corsair Employees
Jack I am sorry you were not Ignored just I missed the post. And I do apologize! If you are getting errors still I would try the modules one at a time and maybe if possible can you test them on another MB? A friend perhaps! Also did you load setup defaults before you set the memory timings? Ram Guy
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...