Jump to content
Corsair Community

Update seems to make pump go faster and no adjustment


Thorsson

Recommended Posts

I have what must now be an ancient Corsair H80i, Firmware 1.07. I just updated the Link software for the first time in ages. Seems more solid than previous, but the pump is now going faster and doesn't seem adjustable - it's too noisy!

 

Anything I can do?

Link to comment
Share on other sites

I have what must now be an ancient Corsair H80i, Firmware 1.07. I just updated the Link software for the first time in ages. Seems more solid than previous, but the pump is now going faster and doesn't seem adjustable

  1. The pump speed of the H80i in not adjustable and the 1.0.7 firmware is rather old.
  2. As CL4 can't update firmware I would install CL 3.2.5742 and update the H80i firmware to 1.1.3.
  3. Next install CL 4.2.2.27 and quote what the H80i pump and fan speeds are.
  4. The pump speed should be about 2,100 RPM.

Link to comment
Share on other sites

left click on the pump icon.

Then go to Mode: and select quite and it will go down to 1830-1860 RPM.

 

When I have it on performance it goes to 2940 - 2970 and I can hear it.

Don't forget to click on Apply or save.

 

This is an H80i rather than an H80iGT or H80iV2 so what you have stated is incorrect.

 

As I specified the H80i pump speed is not adjustable.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...