Jump to content
Corsair Community

XMS PC3000 errors


Recommended Posts

P4 1.8 (Northwood) had been running fine at 2.5 for over three years. ABit IT7-Max. FSB: usually 140; get errors all the way down to 120.

Had been in slot 2 literally for two years (12/10/2002--LOL records); tried both slots 1 and 3.

Voltages from 2.7-2.9. Could go to 3.1, but I'd rather not. I don't think that's the issue.

Timings from both SPD and manual (same):


Ras-Cas delay: 3

Bank cycle: 6

Precharge: 3

Command: 1t


The system had been super stable until this month. Then it wouldn't wake from suspend, had errors copying files, etc. Memtest craps out in test 2 everytime.

Link to comment
Share on other sites

  • Corsair Employees

All of the failures you have listed would suggest some other problem, I would try testing the system with our over clocking the CPU and see if the modules will pass http://www.memtest.org running the CPU and memory 1-1. If you get no errors I would suspect some other problem. But if you still get errors then let’s try replacing your modules.

Please send us a email with a copy of the form or all of your info name address and phone# and the Module part# and copy the link to this post and email it to Warranty@corsairmemory.com. Or you can also use the On Line RMA Request Form as well.

If after 1 day or 24 hours excluding weekends you do not get the RMA please email the same to rma@corsairmemory.com and we will help to resolve it.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...