mrhyde200 Posted December 23, 2004 Share Posted December 23, 2004 I had purchased 2 sets of TWIN-X 3200C2PT (4 Modules - 512MB Each) Things seemed to work fine for about 2 months and then I started experiencing crashes until finally my computer became totally corrupted and I had to reinstall everything. I replaced the mother board, thinking maybe that was the problem, but it wasn't. I narrowed down the problem to a bad memory module & had it replaced. But since I had Twin-X modules I should have had them both replaced. Now my problem is I have 2 modules that in any configuration 1 or the other, or both chips installed. The system won't boot at all. My other two chips work fine. No Problems at all. My System Configuration is as Follows: ASUS-P4C800-E (MB) Intel P4 3.2GHZ 800mhz (Processor) MSI-TI4200 (VGA) 1 Set Twin-X 3200c2pt 1GB Total 80 GB WD C Drive Pioneer 107 DVD-RW 420 WATT Thermaltake Power supply I have personally built and configured many computer systems & workstations and have used about a dozen sets of Twin-X memory pairs. I am certain that these chips are bad. As I am unable to boot the system, so I was not able to get a MemTest error code. Please give me the OK to get an RMA and have the Modules replaced. Thank You! Steve Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted December 23, 2004 Corsair Employee Share Posted December 23, 2004 Please send us a email with a copy of the form or all of your info name address and phone# and the Module part# and copy the link to this post and email it to Warranty@corsairmemory.com. Or you can also use the On Line RMA Request Form as well. If after 1 day or 24 hours excluding weekends you do not get the rma please email the same to rma@corsairmemory.com and we will help to resolve it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.