Jump to content
Corsair Community

Bad Memory


larrycarr

Recommended Posts

  • Corsair Employee

What do you have the FSB jumper set to? I would fist make sure that you have the latestm bios Ver 1.013 and then set the FSB Jumper to Pins 2-3 and then clear the MB bios with out the power connected then with the modules in slots 2-3 when you turn it back on go to bios setup amd load setup defaults and set the following timings:

CPU Freq: 200 MHz

System Performance: User Defined

Memory Frequency: 100%

Dim Voltage to 2.7 Volts

Resulting Frequency: 200 MHz

SDRAM CAS Latency: 2T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 2T

SDRAM Active to Precharge Delay (tRAS): 6T

Then please test with http://www.memtest.org

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...