Jump to content
Corsair Community

XMS3200 Failure


Recommended Posts

I started having stability issues with my system a few weeks ago and finally traced it down to an apparent memory issue in one of my CMX512-3200C2PT chips.


I discovered this by running memtest86 on the system and found a large number of errors. I then swapped the simms and reran the tests and continued seeing errors. From that point, I tested each one indivudually and one passed all the tests whereas the other one failed.


My motherboard is an Asus A7N8X Deluxe and have been running the memory in dual channel mode using the suggested memory settings. I originally purchased the memory from newegg.


The chip is labeled as follows:


CMX512-3200C2PT XMSS3202v1.1


XMS3200 512MB 400MHz CL2

Link to comment
Share on other sites

  • Corsair Employees

Please try and set the Dim Voltage to 2.7 Volts and see if that will solve the problem. But if you still get errors let's try replacing both modules.

Please send us a email with a copy of the form or all of your info name address and phone# and the Module part# and copy the link to this post and email it to Warranty@corsairmemory.com. Or you can also use the On Line RMA Request Form as well.

If after 1 day or 24 hours excluding weekends you do not get the rma please email the same to rma@corsairmemory.com and we will help to resolve it.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...