alexi adhi Posted February 14, 2016 Share Posted February 14, 2016 Hi , I have a problem with the Corsair H100i GTX , Core i5 6600 and Mobo Asus Maximus Hero Alpha VIII . Where for pump and fan settings are not detected in the corsair link , whereas the socket placements I think it is correct that in the CPU Fan , is there a solution ? Link to comment Share on other sites More sharing options...
red-ray Posted February 14, 2016 Share Posted February 14, 2016 Have you disabled CPU_FAN control in the BIOS? Is the H100iGTX listed by Devices and Printers? Does Windows Device Manager list the H100iGTX? If there is a yellow triangle look at the device properties and report the reason code, ideally post a .PNG image. Link to comment Share on other sites More sharing options...
19DeltaSNAFU Posted February 14, 2016 Share Posted February 14, 2016 It's the BIOS. Download the manual and read, read, read. I went through what I though were two faulty boards before I downloaded the manual. I've been building 20 years. Been programming since there was only basic.... if....then. There is way too much redundancy built into that board, you may have do disable fan control in several menus. I made the mistake of not building on the motherboard box, then updating bios, then reading the manual like I should. I built it out completely and all fans, pumps etc booted up at 100%. 11 AF fans at 100%, I thought the case was gonna slide off the table. hehe. The actual manual they send out is about 10 pages long, which I guess is a cost saving measure. With that board I had to have a working computer just to get it built. The two boards that were returned had new Windows 10 Pro keys in them when they went back. I took me a couple of weeks back and forth with MS but I finally not new keys issued. They basically told me I was an idiot and shouldn't be building my own computer...................... I agreed. hehe But I got my keys back. Like I said disable in the BIOS then Asus software or Asus software then BIOS, not sure I remember. Wish you luck with the H100, I put the H110 in all my builds except for my personal, then it's ekg...... love the smell of melting lexan in the morning. I'm new to the forum and I'm an old disabled vet, but if you need any help and can't get a decent answer here PM me. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.