michalis888 Posted January 20, 2016 Share Posted January 20, 2016 Hello Guys, I have recently purchased the H110i GTX and i noticed that it i snot detected in the device manager or the Corsair LINK. I have searched a lot but without finding a solution that could solve my problem. I just want to be able (if its possible) to change the fan speed of the radiator and to see the speed of the pumb. I tried to change the USB port without any results Any help would be appreciated Link to comment Share on other sites More sharing options...
red-ray Posted January 20, 2016 Share Posted January 20, 2016 Try uninstalling it, power the PC down for 2 minutes and see what happens when you boot it back up. Link to comment Share on other sites More sharing options...
michalis888 Posted January 21, 2016 Author Share Posted January 21, 2016 Nothing has change.its all the same Link to comment Share on other sites More sharing options...
red-ray Posted January 21, 2016 Share Posted January 21, 2016 Nothing has change.its all the same I suspect you will have to RMA it so contact https://corsair.secure.force.com/home/home.jsp and see what they say. Link to comment Share on other sites More sharing options...
Corsair Employees Greybeard Posted January 21, 2016 Corsair Employees Share Posted January 21, 2016 Instead of using the USB cable that came with your cooler (the one that plugs into the MB USB header), try using a mini type B to type A USB cable and use one of the rear USB port on your board and see if you get the same issue. Be sure to uninstall C Link first before using the cable I suggested. Link to comment Share on other sites More sharing options...
michalis888 Posted January 23, 2016 Author Share Posted January 23, 2016 Hi guys, i have tried @GreyBeards Suggestions and everything is workinh ok,any idea why the internal usb ports are not working correct with the pumb? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.