JadSeelen Posted January 10, 2016 Share Posted January 10, 2016 I installed my new H110i GTX and connecting the link cable from the pump to the motherboard USB header. I installed Corsair Link software and restarted my system. When checking the Corsair Link software I do not see any reference to my H110i GTX. Please help! Link to comment Share on other sites More sharing options...
Toasted Posted January 12, 2016 Share Posted January 12, 2016 Is the cooler detected in Windows? You can check by looking for the cooler's name or a devices named"Corsair Hydro Series 7289 USB Device". Link to comment Share on other sites More sharing options...
red-ray Posted January 12, 2016 Share Posted January 12, 2016 Is the cooler detected in Windows? You can check by looking for the cooler's name or a devices named "Corsair Hydro Series 7289 USB Device". Using Windows Device Manager! Are there any yellow triangles? Is so post the properties panel which will show the error code. Link to comment Share on other sites More sharing options...
KShion619 Posted January 21, 2016 Share Posted January 21, 2016 Similar Situation here with my Original H80i, its on the latest firmware, and on the November Update of Windows 10 Pro (x64), what displays in Device manager is the base windows driver (HID-Compliant Vendor-Defined Device) (Hardware ID: V1B1C / P0C04) This is not hardware related as I have connected my H80i to another machine's USB ports as well Link to comment Share on other sites More sharing options...
red-ray Posted January 21, 2016 Share Posted January 21, 2016 Is Device Manager reporting an error for it? If not some debug info should help. What does my SIV utility report on [uSB Bus] + [Link Devices] (post screen shots)? Note exit/closedown CL before starting SIV. Which CL version are you using? I guess you have W10 Build 10586. I feel with W10 it's best to put the build in your PC Specs as TH1 and TH2 have different CL issues. Link to comment Share on other sites More sharing options...
KShion619 Posted January 25, 2016 Share Posted January 25, 2016 SIV64X reports I/O Error 31 A device attached to the system is not functioning. and yes, its 10586 on all machines tested on my end Link to comment Share on other sites More sharing options...
red-ray Posted January 25, 2016 Share Posted January 25, 2016 SIV64X reports I/O Error 31 A device attached to the system is not functioning. It's hard to know what could be the cause as you failed to post [uSB Bus] + [Link Devices] screen shots as I asked. Note exit/closedown CL before starting SIV. At a guess you have not done the EnhancedPowerManagementEnabled registry edit. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.