Robdawg Posted January 9, 2016 Share Posted January 9, 2016 I just want to know what thickness radiator I can run in the top with a push pull cfg.. I wanted to do an H105 but have read it will not fit. The photo of the chassis on corsairs own site has a push pull cfg so I know it can be done. (what set up do the have in that photo?) I measure about 3 inches to the PS2 block on my MSI Z7170 - g45. 2 sets of fans are 50 mm (2 inches) so i guess a 25mm radiator is all i can fit?? What model radiator thats good is 25mm? Link to comment Share on other sites More sharing options...
Nichrome Posted January 17, 2016 Share Posted January 17, 2016 Hi Currently I am running dual-fan (240) radiator on top of my Air 540 with push-pull config. I have XSPC EX240 (crossflow)that is 35.5mm thick and fits with push-pull config without problems (just slightly hard to mount it when you don't have another pair of hands :) ). But my motherboard is a modified one (Z97 Gaming 9 AC) that has "basic" heatsinks on VRM/Mosfet so I think that 30mm is max for you as in my case, it does slightly block access (eg: harder a bit to take RAM out as the clamps are slightly covered by fan). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.