BloodStains Posted December 18, 2004 Share Posted December 18, 2004 Asus:P4c800-e Deluxe P4 3.4Gig eVGA:GeForce FX 5700 (2x)Twinx XL Pro 1024-3200 Vantec:520w PSU ran both memtest & Prime95 for 24+hrs pair a-no errors in Prime95, 1 Error in memtest pair b-errord in less then 2hrs in Prime95, 22errors in memtest DDR voltage set to 2.85v Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 20, 2004 Corsair Employees Share Posted December 20, 2004 Please make sure that you have the latest BIOS for your MB and load Setup/optimized default settings, and try the following BIOS settings; TwinX1024 or TwinX512-3200XL Advanced/Jumper Free AI over clocking: Manual CPU Freq: 200 DRAM Clock: 400 MHz Memory or Dim Reference voltage: 2.75 Volts System performance: Auto AGP Voltage: Default *unless you have ATI (9200 or 9600) or NVIDIA (5200 or 5700) then 1.6 Volts suggested!* Advanced/Chipset Configure Dram timing by SPD: Disabled/User define SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 2T SDRAM Row Precharge (tRP): 2T SDRAM Active to Precharge Delay (tRAS): 5T SDRAM Burst Length: 8 Performance Acceleration Mode: Auto USB Legacy Support: Disabled All other settings should be set to default settings! Then please test them one at a time with http://www.memtest.org and let’s make sure it's not some other issue! I would run the test for at least 2-3 passes to be sure! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.