jkukow Posted December 18, 2004 Share Posted December 18, 2004 I have two sticks of Value Select 512MB PC 3200 running on a Shuttle AN35N Ultra in Dual Channel mode. My memory settings are as follows (settings were taken from this message board). CPU Freq: 200MHZ Dim Voltage: 2.7 DRAM Clock: 100% - 200MHZ CAS Lat: 2.5T RAS to CAS Delay: 3T Row Precharge: 3T Active to Precharge Delay: 8T When I run games such as Half Life 2 or Warcraft III after a few min in the game Windows will report read access errors and the game will crash. I took what I thought to be the offending stick out and no longer have the crashes. Same applies for memtest86 errors with both sticks in there, none when I remove the second stick. Link to comment Share on other sites More sharing options...
Wired Posted December 19, 2004 Share Posted December 19, 2004 Tried the good stick in other slots to see if it's a bad slot? Link to comment Share on other sites More sharing options...
jkukow Posted December 19, 2004 Author Share Posted December 19, 2004 Yes, I've tried slots two and three with a friends module and get no errors. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 20, 2004 Corsair Employees Share Posted December 20, 2004 Please send us a email with a copy of the form or all of your info name address and phone# and the Module part# and copy the link to this post and email it to Warranty@corsairmemory.com. Or you can also use the On Line RMA Request Form as well. If after 1 day or 24 hours excluding weekends you do not get the rma please email the same to rma@corsairmemory.com and we will help to resolve it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.