Jump to content
Corsair Community

Is my 1000w RMi Ok ?


Dicehunter

Recommended Posts

Just opened up Corsair link and after watching a review my numbers aren't looking right, The numbers the red arrows are pointing to in the pic for the 12, 5 and 3v, Should they not be 12, 5 and 3 ?

 

Idle -

 

http://i.imgur.com/y4aqrdP.png

 

 

Load -

 

http://i.imgur.com/HYi7nff.png

 

 

As you can see even with a full system load the lower 5v never touches 5v and the 3.3v never moves from 1.40 at all.

 

Could it be a fault ? RMA time ? or is this normal ?

Link to comment
Share on other sites

Those are Amps. Not Volts. Amps.

 

I know sorry forgot to put that but in an OC3D review video when he had a light load of around 200w put on the PSU the 5 and 3.3 amp readings were both 5 and 3.3 yet mine even with a full load on the system never gets to 5 and the 3.3 never gets to 3.3.

 

Sorry for any noobiness I'm just worried my PSU has somehow become defective.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...