sexwitmyglasses Posted December 30, 2015 Share Posted December 30, 2015 Hi guys, The headphone jack on my 760 doesn't seem to be working. I'm plugging the header straight into my on board audio. The previous case I used everything seemed to work fine, so I don't think anything is wrong with the board. I've tried different sets of headphones and my machine doesn't seem to pickup that a set has been plugged in. My USB 2 and 3 headers work just fine. Link to comment Share on other sites More sharing options...
Toasted Posted December 30, 2015 Share Posted December 30, 2015 Double check the front panel audio connector an try plugging a microphone in. Is it detected? Link to comment Share on other sites More sharing options...
snapper69 Posted December 30, 2015 Share Posted December 30, 2015 You can also try the rear header to see if that is working. I had a few problems with headphones on my newish setup that turned out to be software. Link to comment Share on other sites More sharing options...
sexwitmyglasses Posted December 30, 2015 Author Share Posted December 30, 2015 Thanks guy's. I'll check this out when I get home and report back. Link to comment Share on other sites More sharing options...
sexwitmyglasses Posted January 3, 2016 Author Share Posted January 3, 2016 Ok I got this resolved. Turns out the header was plugged in but off by 2 pins. *facepalm* Corrected that and reinstalled the driver everything is good. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.