Thisisit123 Posted December 27, 2015 Share Posted December 27, 2015 Hi, my Corsair H100i GTX pump fan is running at 2950 rpm on performance mode and theres no noise , And temps keeps dancing from 40 to 55 while idle .....80 while stressed. is there a way to increase the pump's fan speed ? i have just applied thermal paste and remounted the cooler.... still same temps....any ideas ? Link to comment Share on other sites More sharing options...
Thisisit123 Posted December 27, 2015 Author Share Posted December 27, 2015 with performance mode..2950 rpm i can hardly hear the pump fan spinning... with quite mode i can hear some Zrrrrrrrrrrrrrrrrrrrrrrr,,,,sorry for my bad english Link to comment Share on other sites More sharing options...
Datakiller24 Posted December 28, 2015 Share Posted December 28, 2015 Hi, Your pump rpm on performance mode should be around 2760 rpm. Your fans up to 2200 rpm in performance mode. You need to set separately the FAN mode and the pump mode (click in CL on the icon and on the right panel select the mode). The pump has humming noise, it´s normal, on silent mode ... barely hearable from close distance even. How do You have connected Your cooler? How is Your fan controller setup in bios ? Fan control should be off in bios (off or manual set to 100%). I have the same CPU like You, my iddle CPU temps are around 32°C, cooler temp around 29°C, load temps up to 55-60°C CPU temp and 34-35°C cooler temp. I´m using custom fan profiles (silent) in performance mode this can be better. Link to comment Share on other sites More sharing options...
Thisisit123 Posted December 28, 2015 Author Share Posted December 28, 2015 my pump fan speed at 2950 makes the same noise as in quite mode... like ... as if its running at 900rpm Link to comment Share on other sites More sharing options...
Thisisit123 Posted December 28, 2015 Author Share Posted December 28, 2015 my Fan controller is set to 100% in bios but pump speed in bios is 900rpm Link to comment Share on other sites More sharing options...
Datakiller24 Posted December 28, 2015 Share Posted December 28, 2015 Hi, Your bios receives the speed of the CPU cooler fan through the connected cable (3PIN). The fan is controlled by the corsair link software. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.