Naojirou Posted December 27, 2015 Share Posted December 27, 2015 Hello. I got Obsidian 750d and an EVGA 980 Ti Hybrid. Now I am planning to get an H110i GTX, however one thing bugs my mind. If i am to place the 980 radiator to the top, on the frontmost side on the case (Through ODD Bay), does that leave any room for H110i on the top? I know that the top has enough space for 3 140s but with the extra on the radiators, I was wondering if this is possible. Also I am wondering about the screw holes, whether they will fit or not. Link to comment Share on other sites More sharing options...
Toasted Posted December 28, 2015 Share Posted December 28, 2015 I don't think it will work. Is there enough tubing length for the Hybrid card to reach the top? You should be able to mount the radiator to the rear and possibly the front as well. Link to comment Share on other sites More sharing options...
Naojirou Posted December 28, 2015 Author Share Posted December 28, 2015 I don't think it will work. Is there enough tubing length for the Hybrid card to reach the top? You should be able to mount the radiator to the rear and possibly the front as well. On the hybrid, with an odd setup, if I move the card to the bottommost PCI slot, it can reach to the backmost slot of the top, barely. So it is the length of it ignoring the difference in mobo sizes. Thus by moving the card to the top PCI slot, I will be able to get some space to move the radiator to the frontmost slot. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.