thefish1971 Posted December 17, 2004 Share Posted December 17, 2004 im planning an a64 build but cannot find a retailer anywhere in the uk that sell the retention bracket anywhere also if i fit a new waterblock what ones fit the hydrocool without too much modding Link to comment Share on other sites More sharing options...
Bio-Hazard Posted December 17, 2004 Share Posted December 17, 2004 Any block that has 1/4 inch (6mm) fittings for 1/4 inch (6mm) ID tubing will work just fine with the Hydrocool........... ;): And seeing as you live in Europe, there are a ton of them that have tested out to be outstanding. 1A-Cooling has some of the best performing blocks tested and at a great price. http://www.1a-cooling.de/index.htm This block has won just about all tests over in Europe to date: http://www.alphacool.de/perl/shop.pl?s=0a352d93a062fdd8a9c7&l=2&rm=get_art&menu_id=2&prod_id=120&art_kz=118&art_id=12010 http://www.alphacool.de/upload//high/12126_1.jpg And I know for a fact that they both work with a A64 just fine because I've reviewed the blocks from both companies........... :D: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.