Chopain Posted December 25, 2015 Share Posted December 25, 2015 I'm having problems with my new build. I believe I have the cooling system installed properly. I have the three pin connected to the CPU fan on the motherboard. I have the sata connected to the sata properly. And I have the fans connected properly. The BIOS reports that there is no CPU fan. The BIOS also shows the temperature of the CPU to reach 84 degrees Celsius in about 30 seconds. I own h110 GTX. The fans are working and I do hear liquid moving but the liquid moving might be from my video cards so I'm not absolutely sure if the pump from the cooler is what the liquid movement is from. Does anyone have any suggestions for me. Link to comment Share on other sites More sharing options...
worf105 Posted December 25, 2015 Share Posted December 25, 2015 Hey Chopain, Sata power to the power supply, Fans plugged in the 2-way splitter and the single wire in the CPU header. worf105 Link to comment Share on other sites More sharing options...
Chopain Posted December 25, 2015 Author Share Posted December 25, 2015 Yes, that is how it is all connected. Link to comment Share on other sites More sharing options...
worf105 Posted December 25, 2015 Share Posted December 25, 2015 Check if the CPU header single cable is fully seated as mine pushed out when connecting to the header. Link to comment Share on other sites More sharing options...
Chopain Posted December 25, 2015 Author Share Posted December 25, 2015 One of the tubes feels warm while the other one is cool. Link to comment Share on other sites More sharing options...
worf105 Posted December 25, 2015 Share Posted December 25, 2015 Sound like you need to return the H110i GTX for a replacement Link to comment Share on other sites More sharing options...
Toasted Posted December 26, 2015 Share Posted December 26, 2015 As worf105 mentioned, It sounds like the cooler may be faulty. You can contact your retailer and see whether they can replace the cooler for you or you can request an RMA to replace the cooler via Corsair. Link to comment Share on other sites More sharing options...
Chopain Posted December 27, 2015 Author Share Posted December 27, 2015 I loosened the screws and that fixed everything. Idle temperature of 30. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.