DarkStalker Posted December 22, 2015 Share Posted December 22, 2015 Hey guys, I was using one H80i on my CPU and other on my GPU (970 + HG10) with Windows 7 x64. Both WC works on the Corsair Link, probably on 3.2.5695 version. Last weekend I changed my hardware for a Asus Z97-Pro Motherboard, Core i7 4790k and 16GB 2400MHz Corsair Vengeance. Still with my 970 and HG10. Now with Windows 10 x64. But now I can't use Corsair Link like before. I start using last version (3.2.5742) and it keeps restarting for a new harware detection, without luck. I did the Regedit tricks found on internet but that doesn't work for me. So I instaled the previous version (3.2.5695) and one of the H80i now works, but not both together. If I plug just the H80i of the CPU, it works. If I plug just the H80i of the GPU, it works. But both conected, just the GPU one works. What I have to do? Glad with someone can help me. And sorry for the bad English. Thx. Link to comment Share on other sites More sharing options...
red-ray Posted December 22, 2015 Share Posted December 22, 2015 I can't use Corsair Link like before. I start using last version (3.2.5742) and it keeps restarting for a new harware detection, without luck. I did the Regedit tricks found on internet but that doesn't work for me. Which regedits? Have you done http://forum.corsair.com/forums/showthread.php?t=153706? Update you PC Specs to W10 and as it's W10 ideally the Build number Link to comment Share on other sites More sharing options...
DarkStalker Posted December 22, 2015 Author Share Posted December 22, 2015 Hi red-ray, sorry, just now I realize that there is a section for Corsair Link. Can you please move my thread there? About your link, I did that trick on SelectiveSuspendEnabled before creating that post. I always create a thread just when I really tried solutions found on web. And sorry, but I don't understand what you need with your last words: "Update you PC Specs to W10 and as it's W10 ideally the Build number" Thanks! Link to comment Share on other sites More sharing options...
DarkStalker Posted December 23, 2015 Author Share Posted December 23, 2015 Fixed the problem by uninstalling the CL version 3.2.5695 and reinstalling version 3.2.5742. Now, I can see all pumps and fans. After reinstalling CL I checked the Registry with regedit. All are set to Zero (0), on both WC. By the way, the H80i on my CPU is only using one Fan (Push). Can't use the other because it will hit my RAM on my Mid Tower Case. There is a slim Fan with good static pressure so I can buy one and use between Rad and memory? Thanks. Link to comment Share on other sites More sharing options...
red-ray Posted December 23, 2015 Share Posted December 23, 2015 And sorry, but I don't understand what you need with your last words: "Update you PC Specs to W10 and as it's W10 ideally the Build number" With W10 there is TH1 (Build 10240) + TH2 (Build 10586) and I expect there TH3 soon. There are issues on TH2 that so not exist on TH1, so you need to specify the Build # for W10. Link to comment Share on other sites More sharing options...
DarkStalker Posted December 26, 2015 Author Share Posted December 26, 2015 Version 1511 Build 10586.36 But its working now, after the described on my reply on post 4. By the way, the H80i on my CPU is only using one Fan (Push). Can't use the other because it will hit my RAM on my Mid Tower Case. There is a slim Fan with good static pressure so I can buy one and use between Rad and memory? Another question, is normal to see a huge difference between temps reported by H80i and the CPU itself? Like 10-15 ºC, on full load? Thanks. Link to comment Share on other sites More sharing options...
DarkStalker Posted January 7, 2016 Author Share Posted January 7, 2016 Hi red-ray, sorry for bothering you, but can you or other user here on forums answer my two questions above? Thank you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.