Jump to content
Corsair Community

Fault XMS3202v1.2 module


Recommended Posts

Ive got a faulty XMS Module, I have ran memtest and it comes up with loads of errors on this module.


The memory is CMX256A-3200C2PT (XMS3202v1.2) on a system including:

3x 3200XMS C2 v1.1

ATi Radeon 8500 64MB

DFI LanParty 865PE

Intel P4 3Ghz (800FSB)

Aureon 5.1 Air


I have tried putting the voltages to max to try and get this module stable, but still loads of errors - the other 3 modules (running at 2-2-2-6) run with no problems it seems according to MEMTEST.


Please can I have authorisation for an RMA?

Link to comment
Share on other sites

  • Corsair Employees

XMS3200C2 would be rated at Cass 2-3-3-6 and I would set the Voltage to 2.7 Volts and test the module by it self. And if you are running these modules in the same MB I would set the timings to Cass 2.5-3-3-7 at 2.8 Volts.

If you do send one I would rma all of them so they match as well

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...