Eldest_One Posted December 15, 2004 Share Posted December 15, 2004 Hello my systems specs are in my sig. I had as you can see 2x256MB of v1.1 of the PC3200C2. Well I wanted to add more so I bought a stick of 512MB PC3200C2 but it is v5.1. It is detected by my MB and set at cas3.00 where as it was cas2.5 before. So I am wonderin is this going to cause me any issues later on? Also should I manually change the timeings? If so what settings should I use for for the M/B that I have? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 15, 2004 Corsair Employees Share Posted December 15, 2004 I would try and set the timings to Cass 2.5-3-3-7 and set the dim Voltage to 2.7 Volts then test with http://www.memtest.org. However, it would be best if all of the modules were the same revision. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.