TimM Posted December 13, 2004 Share Posted December 13, 2004 I just put together a system with an Asus P5AD2-E Premium, which came with BIOS revision 1001. I populated it with 2 Meg of TWIN2X1024-4300C3PRO. MEMTEST86 v. 3.2 ran for 48 hours with no problems. Then I downloaded and installed their latest BIOS, rev. 1002. Disaster! The system went totally bonkers, and MEMTEST86 spewed out errors as fast as they could scroll across the screen. When I reverted back to 1001 it was fine again. I await their comment. Beware! TimM Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 13, 2004 Corsair Employees Share Posted December 13, 2004 I would try the latest bios, but you should clear the bios after you flash it and set the Dim Voltage to 1.9-2.0 Volts and I would try and set the Rass to Cass to 5 and see if that helps. However we would only be able to gaurentee one set at the tested settings. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.